メインコンテンツまでスキップ

Run a Local Development Network

You can run the Aptos network locally. This local network will not be connected to any production Aptos network (e.g. mainnet), it will run on your local machine, independent of other Aptos networks. Building against a local network has a few advantages:

  • No rate-limits: Hosted services (including the Node API, Indexer API, and faucet) are generally subject to rate-limits. Local development networks have no rate-limits.
  • Reproducibility: When using a production network you might have to repeatedly make new accounts or rename Move modules to avoid incompatibility issues. With a local network you can just choose to start from scratch.
  • High availability: The Aptos devnet and testnet networks are periodically upgraded, during which time they can be unavailable. The internet can also be unreliable sometimes. Local development networks are always available, even if you have no internet access.

Prerequisites​

In order to run a local development network you must have the following installed:

ヒント

If you do not want to run an Indexer API as part of your local network (--with-indexer-api) you do not need to install Docker. Note that without the Indexer API your local network will be incomplete compared to a production network. Many features in the downstream tooling will not work as expected / at all without this API available.

Run a local network​

You can run a local network using the following Aptos CLI command:

aptos node run-local-testnet --with-indexer-api

Note: Despite the name (local-testnet), this has nothing to do with the Aptos testnet, it will run a network entirely local to your machine.

You should expect to see output similar to this:

Readiness endpoint: http://0.0.0.0:8070/

Indexer API is starting, please wait...
Node API is starting, please wait...
Transaction stream is starting, please wait...
Postgres is starting, please wait...
Faucet is starting, please wait...

Completed generating configuration:
        Log file: "/Users/dport/.aptos/testnet/validator.log"
        Test dir: "/Users/dport/.aptos/testnet"
        Aptos root key path: "/Users/dport/.aptos/testnet/mint.key"
        Waypoint: 0:397412c0f96b10fa3daa24bfda962671c3c3ae484e2d67ed60534750e2311f3d
        ChainId: 4
        REST API endpoint: http://0.0.0.0:8080
        Metrics endpoint: http://0.0.0.0:9101/metrics
        Aptosnet fullnode network endpoint: /ip4/0.0.0.0/tcp/6181
        Indexer gRPC node stream endpoint: 0.0.0.0:50051

Aptos is running, press ctrl-c to exit

Node API is ready. Endpoint: http://0.0.0.0:8080/
Postgres is ready. Endpoint: postgres://postgres@127.0.0.1:5433/local_testnet
Transaction stream is ready. Endpoint: http://0.0.0.0:50051/
Indexer API is ready. Endpoint: http://127.0.0.1:8090/
Faucet is ready. Endpoint: http://127.0.0.1:8081/

Applying post startup steps...

Setup is complete, you can now use the local testnet!

Once you see this final line, you know the local testnet is ready to use:

Setup is complete, you can now use the local testnet!

As you can see from the output, once the local network is running, you have access to the following services:

  • Node API: This is a REST API that runs directly on the node. It enables core write functionality such as transaction submission and a limited set of read functionality, such as reading account resources or Move module information.
  • Indexer API: This is a GraphQL API that provides rich read access to indexed blockchain data. If you click on the URL for the Indexer API above, by default http://127.0.0.1:8090, it will open the Hasura Console. This is a web UI that helps you query the Indexer GraphQL API.
  • Faucet: You can use this to create accounts and mint APT on your local network.
  • Transaction Stream Service: This is a gRPC stream of transactions. This is relevant to you if you are developing a custom processor.
  • Postgres: This is the database that the indexer processors write to. The Indexer API reads from this database.

Using the local network​

Configuring your Aptos CLI​

You can add a separate profile, as shown below:

aptos init --profile local --network local

and you will get an output like below. At the Enter your private key... command prompt press enter to generate a random new key.

Configuring for profile local
Using command line argument for rest URL http://localhost:8080/
Using command line argument for faucet URL http://localhost:8081/
Enter your private key as a hex literal (0x...) [Current: None | No input: Generate new key (or keep one if present)]

This will create and fund a new account, as shown below:

No key given, generating key...
Account 7100C5295ED4F9F39DCC28D309654E291845984518307D3E2FE00AEA5F8CACC1 doesn't exist, creating it and funding it with 10000 coins
Aptos is now set up for account 7100C5295ED4F9F39DCC28D309654E291845984518307D3E2FE00AEA5F8CACC1!  Run `aptos help` for more information about commands
{
  "Result": "Success"
}

From now on you should add --profile local to CLI commands to run them against the local network.

Configuring the TypeScript SDK​

In order to interact with the local network using the TypeScript SDK, use the local network URLs when building the client:

import { Aptos, AptosConfig, Network } from "@aptos-labs/ts-sdk";

const network = Network.LOCAL;
const config = new AptosConfig({ network });
const client = new Aptos(config);

The provider is a single super client for both the node and indexer APIs.

Resetting the local network​

Sometimes while developing it is helpful to reset the local network back to its initial state:

  • You made backwards incompatible changes to a Move module, and you'd like to redeploy it without renaming it or using a new account.
  • You are building a custom indexer processor and would like to index using a fresh network.
  • You want to clear all on chain state, e.g. accounts, objects, etc.

To start with a brand new local network, use the --force-restart flag:

aptos node run-local-testnet --force-restart

It will then prompt you if you really want to restart the chain, to ensure that you do not delete your work by accident.

Are you sure you want to delete the existing chain? [yes/no] >

If you do not want to be prompted, include --assume-yes as well:

aptos node run-local-testnet --force-restart --assume-yes

FAQ​

Where can I get more information about the run-local-testnet command?​

More CLI help can be found by running the command:

aptos node run-local-testnet --help

It will provide information about each of the flags you can use.

I'm getting the error address already in use, what can I do?​

If you're getting an error similar to this error:

'panicked at 'error binding to 0.0.0.0:9101: error creating server listener: Address already in use (os error 48)'

This means one of the ports needed by the local network is already in use by another process.

On Unix systems, you can run the following command to get the name and PID of the process using the port:

lsof -i :8080

You can then kill it like this:

kill $PID

How do I change the ports certain services run on?​

You can find flags to configure this for each service in the CLI help output:

aptos node run-local-testnet -h

The help output tells you which ports services use by default.

How do I opt out of running certain services?​

  • Opt out of running a faucet with --no-faucet.
  • Opt out of running a Transaction Stream Service with --no-txn-stream.

How do I publish Move modules to the local testnet?​

If you set up a profile called local above, you can run any command by adding the --profile local flag. In this case, we also use local as the named address in the HelloBlockchain example. The CLI will replace local with the account address for that profile.

aptos move publish --profile local --package-dir /opt/git/aptos-core/aptos-move/move-examples/hello_blockchain --named-addresses HelloBlockchain=local

How do I see logs from the services?​

In the output of the CLI you will see something like this:

Test dir: "/Users/dport/.aptos/testnet"

The logs from each of the services can be found in here. There are directories for the logs for each service. For processor logs, see the tokio-runtime directory.

What if it says Docker is not available?​

To run an Indexer API using --with-indexer-api you need to have Docker on your system.

You might be seeing an error that looks like this:

Unexpected error: Failed to apply pre-run steps for Postgres: Docker is not available, confirm it is installed and running. On Linux you may need to use sudo

Make sure you have Docker 24+:

$ docker --version
Docker version 24.0.6, build ed223bc

Make sure the Docker daemon is running. If you see this error it means it is not running:

$ docker info
...
ERROR: Cannot connect to the Docker daemon at unix:///Users/dport/.docker/run/docker.sock. Is the docker daemon running?

Make sure the socket for connecting to Docker is present on your machine in the default location. For example on Unix systems this file should exist:

/var/run/docker.sock

If it doesn't, open Docker Desktop and enable Settings -> Advanced -> Allow the default Docker socket to be used.

Alternatively, you can find where it is like this:

$ docker context inspect | grep Host
  "Host": "unix:///Users/dport/.docker/run/docker.sock",

Then make a symlink to it in the expected location:

sudo ln -s /Users/dport/.docker/run/docker.sock /var/run/docker.sock

Alternatively, run the CLI like this to tell it where the socket is:

DEFAULT_SOCKET=/Users/dport/.docker/run/docker.sock aptos node run-local-testnet --with-indexer-api

Note: As mentioned above, if you're on macOS or Windows, we recommend you use Docker Desktop rather than installing Docker via a package manager (e.g. Homebrew or Choco).

The local network seems to hang on startup​

If the CLI seems to sit there and do nothing when you are using --with-indexer-api, consider quitting and restarting Docker. Sometimes Docker gets in a bad state. Note that Docker is only required if you are using --with-indexer-api.

How do I use the Postgres on my host machine?​

By default, when using --with-indexer-api the CLI will run a Postgres instance in Docker. If you have Postgres running on your host machine and would like to use that instead, you can do so with the --use-host-postgres flag. There are also flags for specifying how it should connect to the host Postgres. Here is an example invocation:

aptos node run-local-testnet --with-indexer-api --use-host-postgres --postgres-user $USER

How do I wait for the local network to start?​

When running the CLI interactively, you can see if the network is alive by waiting for this message:

Setup is complete, you can now use the local testnet!

If you are writing a script and would like to wait for the local network to come up, you can make a GET request to http://127.0.0.1:8070. At first this will return 503. When it returns 200 it means all the services are ready.

You can inspect the response to see which services are ready.

Example using curl

$ curl http://127.0.0.1:8070 | jq .
{
  "ready": [
    {
      "Http": [
        "http://127.0.0.1:43236/",
        "processor_default_processor"
      ]
    },
    {
      "Http": [
        "http://127.0.0.1:43240/",
        "processor_token_processor"
      ]
    },
    {
      "Http": [
        "http://127.0.0.1:43242/",
        "processor_user_transaction_processor"
      ]
    },
    {
      "Postgres": "postgres://postgres@127.0.0.1:5433/local_testnet"
    },
    {
      "Http": [
        "http://127.0.0.1:8081/",
        "Faucet"
      ]
    },
    {
      "IndexerApiMetadata": "http://127.0.0.1:8090/"
    },
    {
      "Http": [
        "http://127.0.0.1:8090/",
        "Indexer API"
      ]
    },
    {
      "NodeApi": "http://0.0.0.0:8080/"
    },
    {
      "Http": [
        "http://127.0.0.1:43239/",
        "processor_stake_processor"
      ]
    },
    {
      "DataServiceGrpc": "http://0.0.0.0:50051/"
    },
    {
      "Http": [
        "http://127.0.0.1:43235/",
        "processor_coin_processor"
      ]
    },
    {
      "Http": [
        "http://127.0.0.1:43237/",
        "processor_events_processor"
      ]
    },
    {
      "Http": [
        "http://127.0.0.1:43234/",
        "processor_account_transactions_processor"
      ]
    },
    {
      "Http": [
        "http://127.0.0.1:43241/",
        "processor_token_v2_processor"
      ]
    },
    {
      "Http": [
        "http://127.0.0.1:43238/",
        "processor_fungible_asset_processor"
      ]
    }
  ],
  "not_ready": []
}

How do I learn more about the Aptos CLI?​

If you are new to the Aptos CLI see this comprehensive Aptos CLI user documentation.